TK2125 NC deep hole boring machine is specialized in processing deep hole workpiece equipment, standard for KND NC system, selection for Siemens, when that one, precision spindle bearings and delegated oil bearing, high precision, good rigidity; can realize intermittent cutting, improve processing efficiency, processing is not easy to difficult chip breaking materials have obvious advantages; at the same time it retains the advantages of T2120 products, not only can the drilling, boring, can also be used for rolling process. Workpiece ejecting and delegated oil clamping adopts hydraulic control, safe and reliable, convenient operation. Processing is suitable for all kinds of hydraulic cylinder, the spindle hole, cylinder hole, a cooling hole.
the machine is a series of products, but also according to user needs to provide various kinds of distortion products.
The main parameters of
:
the name of the project |
The
parameter |
the name of the project |
The
parameter |
boring maximum diameter of |
250mm |
the main motor power |
30kW |
borehole diameter range |
with the diameter of 40 ~ 80mm |
The hydraulic pump motor power align=left>
|
1.5kW |
boring maximum depth |
1000 to 8000mm |
carriage rapid motor power |
3kW |
the workpiece clamping diameter range |
Phi 60 mm to 300mm |
motor power |
5.37kW AC servo |
high | spindle center
350mm |
cooling pump motor power |
22kW |
the headstock spindle bore |
75mm |
| CNC system
KND or |
| front end of the spindle taper hole
| with align=left>
rated pressure cooling system of |
2.5MPa |
spindle speed range |
61 to 1000r/min 12 |
The flow of cooling system of
|
Max 400L/min |
feed speed range (continuously) |
5 to 1000mm/min |
hydraulic system of rated working pressure |
6.3MPa |
Fast moving speed
|
plate
2000mm/min |
|
| |